Haier HU062WAMNA, Руководство по обслуживанию

Страница: 67 / 158

67
WARNING
The installation, maintenance, service and repair operations of this product shall be carried out by professional
personnel, who have been trainedand certified by national training organizations that areaccredited to teach the
relevant national competency standards that may be set in legislation.
Improper installation may cause water leakage, electrical shock, fire, or explosion.
Install the air conditioner according to the instructions given in this manual.
Incomplete installation may cause water leakage, electrical shock, fire, or explosion.
Be sure to use the supplied or specified installation parts.
Use of other parts may cause the unit to cometo lose, water leakage, electrical shock, fire, or explosion.
Install the air conditioner on a solid base that can support the unit's weight.
An inadequate base or incomplete installation may cause injury in the event the unit falls off the base.
Electrical work should be carried out in accordance with the installation manual and the national electrical wiring
rules or code of practice.
Insufficient capacity or incomplete electrical work may cause electrical shock, fire, or explosion.
Be sure to use a dedicated power circuit. Never use a power supply shared by another appliance.
For wiring, use a cable long enough to cover the entire distance with no connection.
Do not use an extension cord. Do not put other loads on the power supply, use a dedicated power circuit.
(Failure to do so may cause abnormal heat, electrical shock, fire, or explosion.)
After connectiong interconnecting and supply wiring be sure to shape the cables so that they do not put undue
force on the electrical covers or panels.
Install covers over the wires. Incomplete cover installation may cause terminal overheating, electrical shock, fire,
or explosion.
If any refrigerant has leaked out during the installation work, ventilate the room.
(The refrigerant produces a toxic gas if exposed to flames, may cause explosion.)
After all installation is complete, check to make sure that no refrigerant is leaking out.
(The refrigerant produces a toxic gas if exposed to flames, may cause explosion.)
When installing or relocating the system, be sure to keep the refrigerant circuit free from substancs other than the
specified refrigerant(R32), such as air.
(Any presence of air or other foreign substance in the refrigerant circuit causes an abnormal pressure rise or
rupture, resulting in injury.)
During pump-down, stop the compressor before removing the refrigerant piping.
If the compressor is still running and the stop valve is open during pump-down, air will be sucked in when the
compressor is run, causing abnormal pressure in the freezer cycle which will lead to breakage and even injury.
Be sure to establish an earth. Do not earth the unit to a utility pipe, arrester, or telephone earth.
Incomplete earth may cause electrical shock, fire, or explosion. A high surge current from lightning or other
sources may cause damage to the air conditioner.
The installation of pipe-work shall be kept to a minimum.
Pipe-work shall be protected from physical damage and shall not be installed in an unventilated space, if that
space is smaller than the Minimum Room Area specified in the table on the following pages.
Mechanical connections shall be accessible for maintenance purposes.
Information for handling, installation, cleaning, servicing and disposal of refrigerant.
Warning: Keep any required ventilation openings clear of obstruction.
Notice: Servicing shall be performed only as recommended by this manual instruction.
Be sure to install an earth leakage breaker.
Failure to install an earth leakage breaker may result in electric shocks, fire, or explosion.