Hagie STS12i Combo, Руководство пользователя

Страница: 94 / 276

SECTION 3 –
CAB
3-58
• Press the Float Button to turn Float ON.
Press button again to turn Float OFF.
NOTE: The Float Button will illuminate
when in the ON position.
NOTE: When Float operation is enabled on
a 60-ft. NTB, a warning message
(cradle hazard) will appear stating
that before Float will be activated,
ensure the NTB is in the
UNFOLDED position. Press
“Acknowledge” to accept.
30’/40’ NTB Setup
• Press the NTB Setup Button (located on
the Settings Page).
• On the “NTB Adjustments” screen, press
EDIT (next to desired selection -
NTB
Override Timer, Float with Transom
Down, or One Tap Transom Up
).
• Enter/select desired setting, then press
OK.
• Press OK.
60’ NTB Setup
Various 60-ft. NTB adjustments can be
made through the Machine Display to allow
the tool bar to ride through the field and apply
as desired with adjustable up/down functions
to allow the operator to choose the depth in
which the NTB will operate in Float mode.
•
Press the 60’ NTB Setup Button (located
on the Settings Page).
Float Button
(Located on the Auxiliary Controls Page)
Float Warning Message
(60’ NTB only)
NTB Setup Button
(Located on the Settings Page)
-Typical View
NTB Adjustments Screen