Hagie STS12i Combo, Руководство пользователя, Страница: 109 / 276

4-14
SECTION 4 –
ENGINE AND DRIVE SYSTEMS
machine travels when the Hydrostatic Drive
Control Handle is in the fully FORWARD
position and the Decel Pedal is NOT pressed.
NOTE: The Target Speed displayed is the
maximum speed for the selected
speed range.
To Change Target Speed
Refer to “Machine Display” provided in
the
Cab Section
elsewhere in this manual for
further information.
Throttle Switch
The Throttle Switch (located near the
Hydrostatic Drive Control Handle) is used to
control engine speed (RPM).
NOTE: The operator may select throttle
setting by operating the Throttle
Switch. However, engine speed is
also controlled by movement of the
Hydrostatic Drive Control Handle.
NOTE: Engine speed can range between 850
and 2300 RPM in both Road and
Field Mode.
The Throttle Switch works with a timer to
tell the engine how fast to run. The longer the
operator holds the switch in either direction
(press UP/“rabbit icon” to increase the speed,
press DOWN/“turtle icon” to decrease the
speed), the more the engine will speed up or
slow down.
To Change Throttle Setting Values
Refer to “Machine Display” provided in
the
Cab Section
elsewhere in this manual for
information.
Speed Ranges
Speed ranges are selected by pressing the
Shift Up/Down Switches (located on the
Hydrostatic Drive Control Handle). Refer to
“Machine Display” provided in the
Cab
Section
elsewhere in this manual for further
information on adjusting speed range
settings.
Example:
If speed ranges are set at 5, 10, 15, and 20
mph (8, 16, 24, and 32 km/h), the machine
will start in the 5 mph (8 km/h) target range.
Target Speed
(Located on the Home
Page - Road and Field Mode)
Throttle Switch
(Located near the Hydrostatic
Drive Control Handle)
-Typical View