Hagie STS12i Combo, Руководство пользователя, Страница: 189 / 276

7-56
SECTION 7 –
SPRAY SYSTEMS
FOAM MARKER SYSTEM
- If Equipped
Foam Marker Operation
1. Open the Foam Marker Valve (located
near rear of rinse tank).
• Turn valve “clockwise” to open.
• Turn valve “counter-clockwise” to close.
2. Locate the Foam Marker Switch (located
on the side console).
• Press Foam Marker Switch in the UP position if
foam application is desired from the Left Foam
Drop.
• Press Foam Marker Switch in the DOWN
position if foam application is desired from the
Right Foam Drop.
• Return Foam Marker Switch to the MID (Off)
position if no foam is desired.
3. Observe system pressure indicated on the
Foam Pressure Gauge (located on the
side of the Foam Marker Tank, mounted
on the right-hand side of machine).
Pressure Adjustment
• Turn Foam Pressure Dial (located on the
side of the Foam Marker Tank) to adjust
air pressure in the tank. Turn dial “clock-
wise” to INCREASE pressure. Turn dial
“counter-clockwise” to DECREASE
pressure.
CAUTION
Maximum foam regulator pressure is
20 PSI (1.4 bar). Use of higher pressure
may cause personal injury and system
damage and will void the warranty.
Foam Marker Valve
(Located near rear of rinse tank)
-Typical View
Foam Marker Switch
(Located on the side console)
-Typical View
Foam Pressure Gauge
(Located on the side of the
Foam Marker Tank, mounted on
the right-hand side of machine)
-Typical View