RE 15345-WA, Version 11.2022, Bosch Rexroth AB
General notes regarding property damages and product damages |
Drive system Hägglunds Fusion 13/72
3 General notes regarding property
damages and product damages
NOTICE
Danger from improper handling
Product can be damaged.
f
Do not expose the product to an impermissible mechanical load.
f
Never use the product as a handle or step.
f
Do not place/lay any objects on the product.
f
Do not strike the Hägglunds drive system or any part of it or its accessories.
f
Do not set/place the Hägglunds motor on the drive shaft or fittings.
f
Do not strike fittings (e.g. sensors or valves).
f
Do not strike sealing surfaces (e.g. service line ports).
f
Leave the protective covers on the Hägglunds drive system until shortly before
installation.
f
Make sure that the electronics are not electro-statically charged
Damage to equipment due to improper lubrication
Product can be damaged or destroyed.
f
Never operate the Hägglunds drive system with insufficient hydraulic fluid.
f
When commissioning a machine/system, make sure that the case interior and
the service lines of the hydraulic motor and pump are filled with hydraulic
fluid and remain filled during operation.
Mixing of hydraulic fluids
Product can be damaged.
f
Any mixing of hydraulic fluids of different manufacturers or different types of
the same manufacturer is not permissible in general.
Wrong voltage
Electric motor damage.
f
All electrical supply levels shall be within the limits that the equipment is
constructed for, see order specific Hägglunds Fusion documentation and
product identification.
Damage from electro-welding
Product can be damaged.
f
Do not perform electro-welding on the Hägglunds drive system.
f
Do not perform any electro-welding on the driven machine without
disconnecting the articulated connection from ground.
f
Remove any sensitive electronic equipment before performing any
electrowelding on the machine.
