10/72
Hägglunds Fusion Drive system
| Safety instructions
Bosch Rexroth AB, RE 15345-WA Version 11.2022,
2.6
Product-specific safety instructions
The safety instructions below apply to chapters
DANGER
Danger from excessively high pressure
Danger to life or risk of injury, damage to equipment.
Operating the components above the permissible maximum pressure can cause
components to burst and hydraulic fluid to escape under high pressure.
f
Operate the components only within permissible maximum pressure.
Danger from suspended loads
Danger to life or risk of injury, damage to equipment.
Improper transportation may cause the Hägglunds drive system
to fall down lead
to injuries e.g. crushing or broken bones or damage to the product.
f
Make certain that the forklift truck or lifting device has adequate lifting
capacity.
f
Never stand under or put you hands under suspended loads.
f
Ensure your position is stable during transportation.
f
Use your personal protective equipment (e.g. protective goggles, safety gloves,
suitable working clothes, safety shoes).
f
Use suitable lifting device for transport and storage, installation and for
removal and repair. Make sure the electric motor is well mounted or anchored
when the lifting device is disconnected.
f
Observe the prescribed position of the lifting strap.
f
Observe the national laws and regulations on work and health protection and
transportation.
Pressurized machine/system
Danger to life or risk of injury, serious injuries when working on machines/
systems not shutdown! Damage to equipment.
f
Always lockout-tagout electric motors before maintenance.
f
Do not disconnect any line connections, ports and components when the
machine/system is pressurized.
f
Always ensure that no energy is accumulated before any measures.
f
Ensure that no pressure will enter the hydraulic system in the drive system via
the hydraulic motor e.g. loads on the shaft or winch drum.
