6/72
Hägglunds Fusion Drive system
| This documentation
Bosch Rexroth AB, RE 15345-WA Version 11.2022,
1.3.1 Safety messages
This documentation includes safety messages placed before sequential operating
procedures that may involve the risk of personal or property damage. The
described precautionary measures must be observed.
Safety messages are structured as shown below:
SIGNAL WORD
Type and source of risk
Consequences if disregarded
f
Precautionary measures
f
<listing>
•
Warning sign:
draws attention to the risk
•
Signal word:
identifies the hazard level
•
Type and source of risk:
identifies the type and source of the hazard
•
Consequences:
describes what occurs when the safety messages are of non
compliance type
•
Precautions:
indicates how the hazard can be avoided
Table 2: Risk categories to ANSI Z535.6-2006
Warning sign, signal word
Meaning
DANGER
Indicates a hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING
Indicates a hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION
Indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury.
NOTICE
Indicates potential property damage: the product or the
environment may be damaged.
1.3.2 Symbols
The following symbols identify notices that are not safety-relevant, but enhance
the comprehensibility of the documentation.
Table 3: Meaning of the symbols
Symbol Meaning
When this information is not observed, optimum use or operation of the product
cannot be ensured.
f
Single, independent step
1.
2.
3.
Numbered instructions:
The number indicates that the different steps are to be performed successively.
Center of gravity
Markings on packaging to indicate where the center of gravitiy are.
