RE 15345-WA, Version 11.2022, Bosch Rexroth AB
Installation |
Drive system Hägglunds Fusion 23/72
7 Installation
7.1 Installation directives
If the drive system is to work properly it must be installed in accordance with
these instructions. The conditions the system will operate in must be taken into
consideration.
Improper installation, not following the instructions in this manual and in the
attached technical documentation, may affect the function and/or the service
life of the drive system. It is important that the safety precautions in this manual
always are followed.
Position the drive system
•
pivot attachment to a firm foundation.
• to ease maintenance and service.
•
protected from airborne sprays, heavy contamination, and radiated heat.
•
to ensure free ventilation for cooling purposes for the electric motor and the air-
oil cooler.
NOTICE
Frame feet bolted to foundation
Damage on equipment due to frame not designed to handle external forces.
f
Do not bolt frame feet to foundation .
7.2 Lifting methods
Lifting with ropes/chains
DANGER
Danger while transporting or lifting Hägglunds drive system due to heavy
weight!
Danger to life, risk of injury or serious injuries and risk of damage to equipment
f
Do not lift the drive system with a fork lift.
f
Make sure that lifting device is correctly installed.
f
Do not stand under hanging load.
f
Always make sure where the center of gravity is before any lifting.
Danger if using wrong lifting equipment!
Danger to life, risk of injury or serious injuries and risk of damage to equipment!
f
Make sure the correct lifting equipment is used.
f
Use only lifting equipment adapted to the weight of the drive system (check
rating plate inside the cabinet).
f
Always use the number or lifting points, seen in
when lifting the drive
system.
