64/72
Hägglunds Fusion Drive system
| Removal and replacement
Bosch Rexroth AB, RE 15345-WA Version 11.2022,
CAUTION
Contact with hydraulic fluid!
Hazard to health/health impairment e.g. eye injuries, skin damage, toxication
during inhalation!
f
Avoid contact with hydraulic fluids.
f
When working with hydraulic fluids, strictly observe the safety instructions
provided by the lubricant manufacturer.
f
Use PPE (e.g. safety glasses, safety gloves, suitable working clothes, safety
shoes).
f
If hydraulic fluid should, inadvertently comes into contact with your eyes or
bloodstream or is swallowed, consult the medical care immediately.
NOTICE
Escaping or spilling hydraulic fluid!
Environmental pollution and contamination of the ground water!
f
Use an oil binding agent if hydraulic fluid is spilled.
f
Observe the information in the safety data sheet for the hydraulic fluid and the
specifications provided by the system manufacturer.
Disassembly:
•
Label the parts
•
Protect easily damaged parts and machined surfaces.
•
Inspect all parts during disassembly for wear or damage.
•
If hydraulic fluid will be drained and reused, make sure that drain containers are
clean and covered when not in use.
•
Clean all metal parts with a suitable solvent and set aside on a clean and lintfree
cloth to drain.
For details regarding removal from customer shaft see Installation and
Maintenance manuals;
respectively
Reassembly:
•
Replace all seals, gaskets and o-rings with new items of the correct size and
lubricate with system hydraulic fluid before assembly.
•
Refill hydraulic fluid according to section
