32
Figure 33 Configuring basic shared storage information
7.
Click
Next
.
8.
Configure the following parameters:
{
IP Address
—Specify the IP address of the IP SAN storage server. This field is required for
an iSCSI shared directory. If multiple paths are available, use semicolons (;) to separate the
IP addresses.
{
LUN
—Specify a LUN for the shared file system. This field is required for an iSCSI shared
directory.
{
NAA
—Specify the network addressing authority identifier for the LUN, which is a unique
identifier of the LUN on the storage server. For an iSCSI shared directory, this field is
automatically determined by the selected LUN. For an FC shared directory, you must select
a LUN for this field.
{
Service Storage
—Enable this option to allow the shared file system to be used for storing
files of the VMs automatically deployed by the system. As a best practice, enable this
option.
Figure 34 Configuring LUN information
