28
The system starts to configure the host and will open the UIS Manager homepage after host
configuration.
Figure 25 Configuring the host
Adding a virtual switch
A virtual switch provides software-based switching between VMs, hosts, and the external network.
Perform this task only when IP SAN storage is used.
To add a virtual switch:
1.
On the top navigation bar, click
Networks
, and then select
vSwitches
from the navigation
pane.
Figure 26 Accessing the vSwitches list
2.
Click
Add
.
3.
Enter the vSwitch name, select
Storage
as the network type, select
VEB
as the forwarding
mode, and enter the VLAN ID.