120
Figure 157 Installing the chassis-open alarm module
NOTE:
The installation procedure is the same for the independent chassis-open alarm module and the
chassis-open alarm module attached to the left chassis ear. This figure uses the chassis-open
alarm module attached to the left chassis ear as an example.
3.
Install the access panel. For more information, see "
."
4.
Rack-mount the server. For more information, see "
5.
Connect the power cord. For more information, see "
6.
Power on the server. For more information, see "
Replacing chassis ears
WARNING!
To avoid bodily injury from hot surfaces, allow the server and its internal modules to cool before
touching them.
Replacing the right chassis ear
Removing the right chassis ear
1.
Power off the server. For more information, see "
2.
Remove the server from the rack. For more information, see "
Removing the server from a rack
."
3.
Remove the access panel. For more information, see "
."
4.
Remove the chassis air baffle. For more information, see "
5.
Remove the fan cage. For more information, see "
."
6.
Remove the right chassis ear:
a.
Disconnect the front I/O component cable assembly from the system board, as shown
in
.