99
Figure 133 Removing the riser card that has a GPU module attached
5.
Remove the GPU module:
a.
Remove the screw that secures the GPU module, as shown by callout 1 in
.
b.
Disconnect the power cord from the riser card, as shown by callout 2 in
.
c.
Pull the GPU module out of the PCIe slot, and then remove the power cord of the GPU
module (if any), as shown by callouts 3 and 4 in
.
This example uses UIS-GPU-M60-1 GPU module in PCIe slot 1 to show the procedure. Not all
GPU modules have power cords.
Figure 134 Removing the GPU module from the riser card
6.
Install a new GPU module. For more information, see "
."
7.
Install the access panel. For more information, see "
."
8.
Rack-mount the server. For more information, see "
9.
