110
4.
(Optional.) Remove PCIe modules that might hinder system battery removal. For more
information, see "
Replacing a riser card and a PCIe module
."
5.
Gently tilt the system battery to remove it from the battery holder, as shown in
Figure 146 Removing the system battery
NOTE:
For environment protection purposes, dispose of the used-up system battery at a designated
site.
Installing the system battery
1.
Orient the system battery with the plus-sign (+) side facing up, and place the system battery into
the system battery holder, as shown by callout 1 in
2.
Press the system battery to seat it in the holder, as shown by callout 2 in
Figure 147 Installing the system battery
3.
(Optional.) Install the removed PCIe modules. For more information, see "
."
4.
Install the access panel. For more information, see "
."
5.
Rack-mount the server. For more information, see "
6.
Connect the power cord. For more information, see "
7.
Power on the server. For more information, see "
8.
Access BIOS to reconfigure the system date and time. For more information, see the BIOS user
guide for the server.
Verifying the replacement
Verify that the system date and time is displayed correctly on HDM or the connected monitor.