43
ACCESS-ories
Push To Open Bracket (348IH)
Required when GTO/PRO 1000
series gate operator(s) must push the
gate open, such as on a sloping
driveway or where space prevents
gate(s) from opening inward (pulled
open). Order two PTO brackets
for conversion of a dual swing gate
installation.
Column Mount Bracket (349IH)
For column installation of the GTO/
PRO 1000 series operators. Designed
for mounting the Post Pivot Bracket
on masonry columns or any flat
surface. Two Brackets are required
for each operator.
GTO Low Voltage Wire (RB509)
The 16 gauge dual conductor, multi-
stranded, direct burial low voltage wire
is required to connect the control board
to the solar panel or the AC
transformer. This wire is also required
for installation of some
accessories such as keypads, locks, or
push buttons (available in 1000' rolls
and specially cut lengths).
Column Mount Lock Receiver
(433IH)
For mounting the Automatic Gate
Lock or Bulldog Pedestrian Lock
in areas with limited space between
the gate and post, such as brick
columns or walls.
Splice Kit - Direct Burial (RB708)
When direct burial wire running
below ground needs to be spliced
the RB708 splice kit must be used.
Splice Kit - Above Ground (RB707)
For providing secure and moisture
resistant above ground splices for
solar panels, key pads, push buttons
and other accessories using GTO low
voltage wire.
Master
®
Pin Lock (RB975)
for GTO/PRO 1000/1200
Master
®
Pin Lock (FM320)
for GTO/PRO 2000/2200
The pin lock is a substitute for the
clevis pin at either or both mounting
points of the GTO/PRO 1000
operator arms and the gate bracket
end of the GTO/PRO 2000. They
help prevent theft of the operator
arm while allowing quick release of
the operator when necessary.
Replacement Receivers
The AQ201: Receiver with a 10 ft. cable (included).
The AWQ325: Receiver with a 25 ft. cable.
The AWQ350: Receiver with a 50 ft. cable.
The AWQ400: Receiver with a 100 ft. cable.
Standard Replacement Power Cables for Gate Operators
The PRO 4.5C (AW201): 4.5 ft. power cable included with GTO/PRO 1000 gate operators with serial numbers.
The PRO 25C (AW202): 25 ft. power cable included with GTO/PRO 1000/1200 gate operators with serial
numbers.
The PRO 40C (AC109): 40 ft. power cable for GTO/PRO 1000 series operators.
