15
Installing The Post Bracket Assembly and Gate Bracket
Step 7:
Mark the holes in the middle of the bracket slots so there will be some room for adjustment when mounting the post
bracket assembly and the gate bracket on the fence post and gate cross member. Then remove the operator and brackets
from the fence and gate.
Step 10:
Drill
3
/
8
" holes in the gate cross
member and mount the gate bracket
with the
3
/
8
" x 3" bolts, washers nuts,
and lock washers provided. Cut off
the ends of the bolts extending beyond
the tightened nuts with hacksaw or
bolt cutters.
Round Tube & Chain Link Gate
Square Tube Gate
Mounting Plate
Created for
Decorative Gate
(required but not
supplied)
Cut off excess bolt with
hack saw or bolt cutters
FRONT VIEW
SIDE VIEW
FRONT VIEW
SIDE VIEW
NOTE: if the fence post has a
diameter greater than 6", it will
be necessary to use threaded
rods or carriage bolts longer
than 8" (not supplied).
Step 9:
Install the post bracket
assembly using (4)
3
/
8
" x 8"
bolts, nuts, washers and lock
washers provided. Cut off the
ends of the bolts extending
beyond the tightened nuts.
Round Metal Post
Round Wood Post
Square Metal Post
Square Wood Post
Cut off excess bolt with
hack saw or bolt cutters
SIDE VIEW
TOP VIEW
EXAMPLES
Step 8:
Drill
3
/
8
" holes in the fence
post as marked.
Post Bracket
Assembly
Mark fence post
and drill 3/8" holes
Gate In Open Position
LEVEL horizontal cross member
Mark gate bracket holes and drill 3/8" holes
Gate Bracket Mounting Examples
