Installation Check List
The installation of this operator conforms to CLASS __________.
The installer verifies that (each item except safety edges must be checked):
___ Recommended safety edges were installed.
___ Customer was informed that this gate is for vehicular use ONLY. Pedestrians MAY NOT use this gate.
___ A separate gate or entrance was installed for pedestrian use.
___ Closed position stop plate was securely fastened.
___ The position of the post bracket assembly complies with the 4
1
/
2
" x 4
1
/
2
" setback requirement.
___ All power cables, receiver cables, and transformer plugs were securely fastened.
___ Petroleum jelly was applied to the control board terminals.
___ All warning signs and labels were installed as specified in the IMPORTANT SAFETY INSTRUCTIONS.
___ Safety instructions were reviewed with the customer.
___ A copy of the IMPORTANT SAFETY INSTRUCTIONS was given to the customer.
___ Customer was instructed about disconnecting the operator for manual operation of the gate.
___ Customer was instructed about proper use of transmitter and (or) other entry controls.
___ Customer was asked to fill out customer support card and mail it to GTO, Inc.
___ Customer was asked to retain all receipts (receipts provide proof of warranty).
___ Customer was asked to retain IMPORTANT SAFETY INSTRUCTIONS, etc. for future reference.
___ The completed installation was photographed from both the front and back of the gate. Photo was dated.
Customer’s Signature
Installer’s Signature
Date
Date
