12
Clevis Pin
Hairpin Clip
Washer
Operator
Gate Bracket
Front Mount
Determining The Mounting Position of The Post Bracket Assembly
and The Gate Bracket
Step 5:
With the gate in the open position (at least 80
o
and no more than 110
o
from the closed position), determine the
position of the post bracket assembly and the gate bracket. While holding the operator in a level position (use a
level), clamp these parts in their respective positions on the fence post and the gate.
Step 3:
Join the post bracket assembly
using the
3
/
8
" x 2
"
bolt in the
center holes as shown. Fasten a
3
/
8
" washer and nut on the end of
the bolt. DO NOT overtighten
nut because the post pivot
bracket will need to be adjusted
later.
Step 4:
Attach the post bracket assembly and the gate bracket to the operator with the clevis pins and washers.
Secure the clevis pins with hairpin clips.
Level Opener
Fence Post
Gate In Open Position
LEVEL horizontal cross member
Post Bracket Assembly
Gate Bracket
AUTOMATIC GATE OPENERS
®
Clevis Pin
Hairpin Clip
Post Bracket Assembly
Operator
Washer
Rear Mount
3/8" x 2" Bolt
Post Pivot Bracket
Post Bracket
Post Bracket
Post Bracket Assembly
3/8" Nut
3/8" Washer
3/8" Lock Washer
