42
GTO Entry Transmitter (RB741)
The GTO Entry Transmitter, with
adjustable code settings, is standard
equipment with all GTO gate operator
systems. Battery included.
GTO Dual Transmitter (RB742)
GTO Triple Transmitter (RB743)
The two and three button transmitters
are used for the remote control of
two or three gate operators and garage
door openers (See Garage Door
Receiver). Battery included.
GTO Key Chain Mini Transmitter
(RB744)
This miniature version of the GTO
entry transmitter has the same
adjustable code settings. Battery
included.
Garage Door Receiver (RB709)
Allows the use of the same GTO remote transmitter (see Dual and
Triple Transmitters) to control the gate operator and garage door
opener. Compatible with most garage door openers.
HEDDOLF
UNIVERSAL
RECEIVER
MODEL 294
Push Button (Doorbell) Control
(RB101)
Unlighted doorbell button for remote
entry or exit control. Connects
directly to the control board using 16
gauge stranded, low voltage, direct
burial wire (not included, see RB 509).
Accessories Available Through Your Dealer
GTO Digital Keypad (F300)
The weatherproof digital keypad can be easily installed as a wired or wireless keypad for all GTO
swing and slide gate operators, and as a wired keypad for the Bulldog Pedestrian Gate Lock. It can
be programmed to recognize fifteen different personal identification number (PIN) codes. Each
code is face programmable with additional security features built in. Requires 3 AA batteries (not
included). Can also accommodate most garage doors and other gate openers. If used as a wired
keypad, 16 gauge standard, low voltage direct burial wire will be required (see RB509).
GTO
Bulldog Pedestrian Gate Lock (FM500)
Similar to the Automatic Gate Lock but designed for horizontal use only on "walk-through"
gates without automatic operators. The Bulldog is an affordable solution to protecting swimming
pool areas, playgrounds, tennis courts, boat docks, etc., from unwanted access. Includes control
box and keyed manual release. Can be used with the GTO Digital Keypad (F300).
, Inc.
SECURITY GATE LOCK
®
GTO
Automatic Gate Lock (FM144)
for closed position pull-to-open applications
A MUST for added security. The plated steel bolt lock has a zinc plated steel housing and is driven
by a 4 ampere solenoid. This horizontal electronic lock is used with all GTO low voltage swing
gate operator systems (not to be used with GTO/PRO AC powered operators) for additional
security and stability. Comes with a keyed manual release.
GTO
Automatic Gate Lock (FM142)
for open position or push-to-open applications
Similar to FM144, but used to secure gates in the open position or for push-to-open gate
applications (not shown).
AUTOMATIC
GATE LOCK
®
ELEC
TRON
IC SECU
RITY L
OCK
1
2
3
6
5
4
7
8
9
0
GTO Exit Wand (FM138)
The GTO Exit Wand is designed for residential and agricultural applications and is compatible
with all the GTO/PRO automatic gate opener models. The Exit Wand is an electromagnetic
sensor, which offers 'hands free' operation of automatic gate openers with a 12 ft. radius of
detection of vehicles in motion.
