GST GST102A, Инструкция по установке и эксплуатации

Страница: 11 / 43

GST102A/GST104A/GST108A/GST116A
Conventional Fire Alarm Control Panel
Installation and Operation Manual
Page
6
1.2.7
Installation and Storage
The control panel is applicable for indoor use below the elevation of 2000m. Overvoltage level is
Class II and pollution degree is 2. Ingress protection level is IP30.
 Installation Environment
Temperature: 0
℃
~40
℃
Relative humidity
≤
95
％
, non-condensing
 Storage Environment:
Temperature: -5
℃
~50
℃
Relative humidity
≤
95
％
, non-condensing
1.3
Controls and Indications
The fascia of the GST-116A is shown below in Fig. 1-1.
There is no Control Enable 003 key-switch used on the large cabinet version panels as Access
Level 2 is achieved when opening the front door (with glass window) which has a 003 lock.
Fig. 1-1
1.3.1
Common Status Indicators
 FIRE: Red. It flashes when there is fire alarm and illuminates steadily when the fire sound
is silenced.
 ALARM ROUTING ACTIVATED: Red. It illuminates steadily when the alarm output is
activated.
 POWER: Green. It illuminates steadily when the CIE is powered up.
 FAULT: Yellow. It flashes when there is a fault and illuminates steadily when the fault
sound is silenced or the CIE enters safe state.
 DISABLE: Yellow. It illuminates steadily if any zone, sounder output or alarm routing
output is disabled.
 SUPERVISED: Yellow. It flashes when any zone defined as supervisory is activated. It
illuminates steadily when the supervisory sound is silenced.
 IN TEST: Yellow. It illuminates steadily when any zone is in test condition.
 MAINS FAULT: Yellow. It flashes when there is mains fault and illuminates steadily when
the fault sound is silenced.