GST GST-IFP8, Инструкция по установке и эксплуатации, Страница: 31 / 66

GST-IFP8 Intelligent Fire Alarm Control Panel
Installation and Operation Manual
Page 21

The panel generates fault sound.

Fault relay outputs.

Battery fault: The panel will reports battery fault if the battery voltage is lower than
21VDC or the internal resistance is higher than 0.7 ohm, and:

Light FAULT and BATTERY FAULT LED.
 The LCD displays “BATTERY FAULT” or “BAT Resistance FAULT”.

The panel generates fault sound.

Fault relay outputs.

System fault: The panel will report system fault if its control CPU and circuit is in
fault and the panel cannot work normally.

It lights the FAULT and SYSTEM FAULT LED.

There is no display on the LCD.

The panel generates continuous alarm sound.

The keypad cannot be used.

After the fault is removed, the FACP has to be reset by rebooting.

Fault relay outputs.

Keypad fault: The panel reports keypad fault if its keypad circuit is in fault:

It lights the FAULT and SYSTEM FAULT LED.
 The LCD displays “hardware fault”.

The panel generates continuous alarm sound.

Fault relay outputs.

The keypad cannot be used.

The FACP can monitor fire alarm.

After the fault is removed, the FACP has to be reset by rebooting.

Ground fault: When ground fault testing terminal J1 is shorted, the input or output
cable is grounded, and the FACP reports ground fault.

It lights the FAULT and GROUND FAULT LED.

The LCD displays GROUND. F.

The FACP generates fault sound.

Fault relay outputs.

Field device fault: If there is trouble with one of the field devices, the panel reports
fault with it, and

The panel lights the FAULT LED.

The corresponding LED on the zone indication panel flashes.

The panel generates fault sound.

Fault relay outputs.

The LCD displays the fault message.