GST-IFP8 Intelligent Fire Alarm Control Panel
Installation and Operation Manual
Page 3
Sounder Disable:
Yellow. It illuminates when there is disabled loop sounder and
goes out when the output is re-enabled.
Disable:
Yellow. It illuminates when any of the loop devices, OUTPUT TO FPE,
OUTPUT TO SOUNDER or ALARM ROUTING OUTPUT is disabled. It goes out
when such condition is cleared.
Delay Mode:
Yellow. It illuminates when the FACP is in delay mode.
Power:
Green. It illuminates when main or standby power is normal.
SILENCE:
Yellow. It illuminates when the FACP is silenced. It goes out only when
new alarm comes.
EVAC:
Red. It illuminates after
EVAC
key is pressed for evacuation.
3.1.3 Description of Keys
SYSTEM SETUP:
System setup key (manager password required), used for
setting up devices/zones in the system, for setting up network system, for
modifying operator password and manager password, for setting up Cause and
Effect equations, for modifying device type, for setting the shift time of day/night
mode, for setting operation mode, for system initialization.
USER SETUP:
User set-up key (operator password required). For setting system
time, setting printing mode, enabling/disabling delay mode, setting test mode,
setting fire alarm verification time, viewing definition of loop devices, viewing
history records, start/stop and for disable/enable operation.
Numerical and Alphabetic Keys (
1, 2ABC, 3DEF, 4GHI, 5JKL, 6MNO, 7PQRS, 8TUV,
9WXYZ, 0, └┘, *)
:
For entering numbers, letters and marks.
RESET:
Resetting the FACP (operator password required).
MUTE:
For silencing the buzzer of the FACP (operator password required).
SILENCE:
For silencing the FACP buzzer and the field sounders (operator
password required). The device types that can be silenced are Type 12, 13, 14, 28,
29, 30.
EVAC:
For starting the field sounders for evacuation (operator password required).
The device types that can be started are Type 12, 13, 14, 28, 29, 30.
ACK:
For acknowledging fire alarm under pre-alarm condition (operator password
required).
CANCEL:
For canceling or exiting an operation. For message displaying, choosing
this key can shift the display to the message of the highest priority.
ENTER:
Confirming inputs to be valid.
, , ,
:
For turning pages or changing the input position.
3.1.4 Zone Indication Panel
Every FACP comes with two zone indication panels, appearance of which is shown in
Fig. 3-4.
Содержание GST-IFP8
Страница 1: ......