GST GST-IFP8 Скачать руководство пользователя страница 27 | Manualshive

Страница: 27 / 66

GST GST-IFP8 Скачать руководство пользователя страница 27

GST-IFP8 Intelligent Fire Alarm Control Panel

Installation and Operation Manual

Page 17

Chapter 5 Display and Disposal of System Information

GST-IFP8 can be started after installation according to description in Chapter 4. Turn on

the power supply, and main and standby power switch on the FACP, the FACP executes

self-test and enter normal standby state. The system will display properly if it is in

normal state, otherwise it will display abnormal information.

5.1 Normal Information

The normal display is shown in Fig. 5-1, which means the system is running normally,
and only

POWER

LED lights. In status bar, only the status of FIRE ALARM ROUTING

(FAR), OUTPUT TO FPE (FPE) and OUTPUT TO SOUNDER (OTS) is displayed.
If the system is in commission state, there is an

“x” mark at the right top of the screen. In

standby state, this mark will disappear. The project name can be defined by the defining
tool software through a PC, which can have maximum 32 characters.

FAR:OK FPE:DIS OTS:OK 20:44:30

FIRE CONTROL PANEL IFP8

GST Co., Ltd.

Mon 28 Jan 2008

×

Project name

Fig. 5-1

Fig. 5-2 shows the system is in normal standby state but with disabled devices. In this
case, the FACP works normally, but corresponding LEDs on the front panel illuminate.

FAR:OK FPE:DIS OTS:OK 20:44:30

FIRE CONTROL PANEL IFP8

GST Co., Ltd.

Mon 28 Jan 2008

With Disable

Fig. 5-2

«
...
25
26
27
28
29
...
»

Содержание GST-IFP8



































































Отзывы:

Нет отзывов