GSSI SIR 4000 Скачать руководство пользователя | Manualshive

Страница: 16 / 163

background image

Geophysical Survey Systems, Inc.

SIR® 4000

Manual

MN72-433 Rev F

10

StructureScan 2D

StructureScan 2D provides quick options for locating shallow structural features in concrete and marking
their location directly on the survey surface. The mode is preconfigured for use with high frequency (high
resolution) antennas.

UtilityScan

Similar to StructureScan 2D, UtilityScan provides quick 2D options for locating buried utilities in soils.

StructureScan3D

This mode is for collecting very high resolution 3D data over concrete. The data can be viewed in a
3D cube to identify targets at different depths to help note clear locations for cutting or coring.

Last Used Settings, New Project, and Playback

These options allow you to either collect or playback data starting from different points.

Last Used Settings

Starts the system in the last used application mode and project. These may be inappropriate settings if the
antenna was changed.

New Project

Opens a new project in whichever application mode is currently selected and requires you to create a new
Project Name.

Playback

Starts the system in the currently selected mode and prompts you to select a file or multiple files for
playback from the last project selected.

Toolbar

The bottom toolbar provides access to system settings and universal setup options. Selecting any of the
Software Control buttons, located immediately under each icon, will open and close each window.

Language

There are six (6) language options on the
SIR 4000 including English, Japanese,
French, Chinese, Portuguese, and Spanish.
Use the Control Knob or the Arrow keys to
move through the different languages. The
menu will automatically close once a
language is selected using either the Control
Knob or the Enter button. You can also back
out of the menu by pressing the Back button.

«
...
14
15
16
17
18
...
»

Содержание SIR 4000




































































































































































Отзывы:

Нет отзывов

Похожие инструкции для SIR 4000

Бренд: Nelsen Corporation Страницы: 16

Бренд: National Instruments Страницы: 34

Бренд: Access Страницы: 12

Бренд: Rachio Страницы: 2

Бренд: OJ Electronics Страницы: 8

Бренд: OJ Electronics Страницы: 112

Бренд: OJ Страницы: 17

Бренд: WAREMA Страницы: 112

Бренд: WAGO Страницы: 414

Бренд: V2 Страницы: 48

Бренд: Keba Страницы: 16

Бренд: KEB Страницы: 16

Бренд: Bardiani Страницы: 96

Бренд: Eaton Страницы: 4

Бренд: Vizio Страницы: 65

Бренд: Haes Страницы: 42

Бренд: Quickie Страницы: 108

Бренд: GARDINER TECHNOLOGY Страницы: 28

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды