GSK GSK983Ma, Руководство пользователя

Страница: 337 / 373

Appendix 5. Parameters
325
Appendi
x
communication setting (such as baud rate) is set by parameter
No.311
3 4 2
PSKPFL skip cutting FL speed
（
for all axes
）
Setting value: 6
～
150000 unit: 1mm/min (metric output)
6
～
6000 unit: 0.1 inch/min (inch output)
3 4 3
3 4 4
3 4 5
3 4 6
GRMIN1 ～ GRMIN4 set the minimum spindle revolution in surface constant speed control mode
(G96)
Setting value: 0
～
9999 unit: RPM
。
It is valid when parameter No.315 bit 6 SLOW=0.
3 4 7
LOWSP sets the minimum spindle revolution in surface constant speed control mode (G96).
Setting value: 0
～ 9999 unit: RPM 。
It is valid only when the parameter No.315 bit 6 SLOW=0.
3 4 8
When the machine tool is provided with auxiliary axis (rotary axis), it sets the JOG feedrate at the
rotation switch position 10 (refer to parameter No. 318 bit 0 ADNW for B type)
Setting value: 1
～
150 unit: deg/min
EXPTR: The time constant of exponential acceleration/deceleration of the spindle and tapping
axis (It is valid in the system with rigid tapping function)
Setting value: 8
～
4000 unit: ms
3 5 5
AOVLE sets the distance Le traveled in deceleration from the end point by automatic tuning in corner
inner side.
Range 0
～
3999 unit: 0.1mm (metric input)
Unit: 0.01inch (inch input)
It can also be set in the “SETTING” screen.
3 5 6
AOVLS sets the deceleration distance Ls traveled from the end point by automatic tuning in
corner inner side.
Range: 0 ～ 3999 unit: 0.1mm (metric input)
unit: 0.01 inch (inch input)
It can also be set in “SETTING” screen.
PSKPFL
GRMIN1
GRMIN2
GRMIN3
GRMIN4
LOWSP
JOGFAD
3 5 1
EXPTR
AOVLE
AOVLS