GSK GSK983Ma, Руководство пользователя

Страница: 250 / 373

GSK983Ma Milling Machine Center CNC System User Manual
238
Part 2
Operation
Setting (valid when the program lock is ON, invalid when it is locked, whose state can be
switched by parameter 11 BIT5 DECI)
（
a
）
Set the mode selection to MDI mode.
（
b
）
Press the cursor key to move the cursor to the item to be altered. The cursor cannot be
moved with the address key N.
（
c
）
Enter 1 or 0 by pressing the P key as shown in the following table.
0 1
X mirror image
（
X MIRRORIMAGE
）
mirror image OFF mirror image ON
Y mirror image
（ Y MIRRORIMAGE ）
mirror image OFF mirror image ON
Mirror image of the 4
th
axis
（
4
THMAXISMIRRORIMAGE
）
mirror image OFF mirror image ON
TV check
（ TV CHECK ）
NO YES
(PUNCH.CODE) EIA ISO
（ INPUT UNIT ）
mm inch
（ INPUT DEVICE1 ） DNC （ set to 0 ）
（
INPUT DEVICE2
）
unused RS232C input
In operation, press P
，
O or 1
，
INPUT key in sequence.
Note 1: Unselected function cannot be set. For example:
（
INPUT UNIT
）
=1 cannot be
used for a metric-system machine when metric-system switch selection function is not
available. Output code
（
PUNCH CODE
）
=1 cannot be set when ISO code input selection
function is not available.
Note 2: INPUT CODE is automatically rewritten when G20 (in inch system) and G21 (in
metric system) code is executed.
Note 3: When data is being input, code standard specifies ISO or EIA is irrelevant to
input. ISO or EIA code can be identified automatically.
Note 4: Output device for data output is set by No. 341.