GSK GSK983Ma, Руководство пользователя

Страница: 188 / 373

GSK983Ma Milling Machine Center CNC System User Manual
176
Part 1 Programming
12.
(2) Editing the following Macro program body
09010
；
#1=ABS[#4]-#[2000+#7]
；
IF[#1 LE0]GOTO 1
；
#2=#1/2
；
#3003=3 ；
G01 X[#1-ROUND[#2]]Y#2
；
G17 G02 X#2 Y-#2R-#2 ；
I-#1
；
X-#2 Y-#2 R#2
；
G01 X[#-ROUND[#2]]Y#2]
；
#3003=0
；
N1 M99
；
3.10.7.6 Call the Sub-program by M Code
The M code set by the parameter can be used to call the sub-program. The command of the N_G
X Y ……M98P
△△△△
; can be replaced by following a simple command.
N G X Y ……M××
；
The sub-program can be displayed on the screen for the M98, but the MF and M codes are not
sent out.
The corresponding relationships between the Mxx code sub-program call and the program
number of the sub
△△△△
-program call are set by parameter.
There are 3 parameters at most can be called the Macro program from the M03 to the M97 other
than the M30 and the M code set by the MBUF1, MBUF2 of the parameters 35 and 36.
The command can be specified from the MDI keyboard, but the argument can not be written.
These M codes sub-program in the whole sub-program can not be called in the Macro program
calling based on the G code or M code or T code, it is the same usage as the M code.
The following parameters are set:
0320 M code for calling the sub-program: 9001
0321 M code for calling the sub-program: 9002
0322 M code for calling the sub-program: 9003
For example: 10.7.8 ATC canned cycle by the M06
(1) Setting the following parameter
Sub-program: The M code called by 9001 is equal to 06, that is, the value of the system
parameter 320 is set to 06.
(2) Recording the following Macro program body
09001
；
#1=#4001 ；
#3=#4003
；
G28 G91 Z0 M20
；
G28 Y0
；
M21
；
G00 Z10000 ；
M22
；
G28 Z0
；
M23
；
G#1 G#3 M99
；