GSK GSK983Ma, Руководство пользователя

Страница: 170 / 373

GSK983Ma Milling Machine Center CNC System User Manual
158
Part 1 Programming
X#24 Y#25
；
G04; It is stopped due to reading the #5021
～
#5023.
G91 X[XP-#5021]Y[yp-#5022]Z[ZP-#5023] ；
┆
(Treatment)
X#24 Y#25 Z#26
；
X#1 Y#2 ；
Z#3
；
M99 ；
(10) Setting and Display of the variable name
The name composed by 8 character at most is assigned the #500
～
#511 variable by the
following commands.
SETVNn[ α
1
α
2
………… α
8
， β
1
， β
2
， ………… β
8
…………] ；
n is the beginning number which owns the name variable number.
α
1
，
α
2
………… α
8
is the name of the variable n.
β
1
， β
2
， ………… β
8
is the name of the variable number n+1, the following items are same.
Characters are divided by the “,”. The all characters can be used for the enabled information
other than the note ending, note beginning, [,], EOB, EOR, : (the colon of the program). The variable
number is not cleared when the power is turned off.
The NO., NAME, DATA are displayed on the LCD in sequence.
Note: Because some equipments can not be used this function, so, #510 and #511 can not be used.
For example: 10.3.8
SETVN 500[ABCDEFGH
，
]
；
3.10.4 Operation command
Each operation can be performed between the variables, such as the universal arithmetic
program.
#i=
＜
Formula
＞
The <Formula> at the right of an operation command is a combination with the constant, variable,
function and operator. The constant is replaced by the #j and #k. The constant with the decimal point
in the <Formula> can be regarded as the decimal point at its end.