GSK 980TC3 Series, Руководство пользователя

Страница: 91 / 226

Chapter 3 Instructions of The Ladder Diagram Edit Software
79
Ⅱ
Operation
3.3.2 Selecting a Figure
In the editing view of the ladder diagram, the black rectangle shadow means cursor, click the left
key of the mouse in the figure editing area between two bus cables, and select the position where
the figure unit needs to be edited. Refer to the following figure.
Fig. 3-3-2-1
When the block is selected, press the mouse left key at the beginning position of the block, then
drag to the end. The selected area indicates by the rectangle with dotted line before releasing the
left key.
Fig. 3-3-2-2
The inverted color of the whole ladder diagram after releasing, that is, the ladder diagram
within this rage is selected, and the next operation can be performed. For example, cutting,
deletion and copy etc..
（
the drawing is executed with inverse colors
）
Fig.3-3-2-3
3.3.3 Editing a Figure
3.3.3.1 Cutting
There are three ways for carrying out this operation after the ladder diagram area to be edited is
selected:
1. Select the cutting after springing the environment menu by clicking the right key of the mouse;