GSK 980TC3 Series, Руководство пользователя

Страница: 30 / 226

GSK980TC3 Series Bus Turning CNC system PLC, Installation and Connection User Manual
18
一
Programming
0 1 2 3 4 5 6 7
K0
K63
Address
number
K relay
area
K1
Fig. 3-6-1
Note: When PLC address K005.2 =1, PLC enters the debugging mode. All of the external alarms are
cancelled, and the machine interlocking signals are then cancelled, the tool-change code can not be
performed. The parameter can be modified only when comprehending the parameter, so that the
damage in the machine tool or injury of the person may occur.
3.7 Information Display Request Address
（
A
）
This address area is reset when the system is turned on
Its definition type: INT8U, totally 32 bytes.
Fig. 3-7-1
3.8 Counter Timer
（
C
）
This area is used for placing the current count value of the counter. The data is reset after the
system is turned off.
Its definition type: 128 addresses.
3.9 Counter Preset Value Address
（
DC
）
This address area is used for storing the counter preset, which is a nonvolatile storage area, that is,
the memorized content may not loose even the system is power off.
Its definition type: 128 addresses. The setting value of the DC is only read instead of writing.