GSK 980TC3 Series, Руководство пользователя

Страница: 74 / 226

GSK980TC3 Series Bus Turning CNC system PLC, Installation and Connection User Manual
62
Ⅱ
Operation
（
1
）
The system appears the ladder name which is running in the interface. The ladder is divided
into three: the ladder is the only one that is running, other 15 ladders in No.0-15 ladder
besides the one is running, up to 4 ladders which can be editable or referred.(they can be
named with 2-digit serial number except for 0-15).
（
2
）
When the system is turned on, the bit parameter 53#0~#3 setting value is the binary
combination parameter, when the setting value is 0, No.0 ladder is used; when it is1~15, No.
0~15 parameter is used. After the system determines to load some ladder which is running
( the operation maybe appear the danger, it is enabled after the system restarts). If the
format is incorrect, the ladder is deleted to recreated, and the user needs to specify the
running ladder No. carefully. Names of all ladder files must be with “ladderXX.grp” (XX is
the serial number) , otherwise, the system does not identify the files. The file format is
determined by the system, and the user cannot modify the file outside of the system,
otherwise, the file maybe be deleted or cannot be identified.
（ 3 ） Selecting ladder. Move the cursor or input “LX”/“LXX” （ X/XX is number ） to specify the file
name, the system checks whether “X”/“XX” is the known file number after “Enter” is pressed,
if the system has not checked it, it creates an ladder with the name “ladder0X.grp” or
“ladderXX.grp” . The system automatically creates “END1” and “END2” when the file is
created.
（
4
）
The file head includes the basic information of file, such as row number, step number. The
step information is the new one when it is converted. The user can delete the ladder which is
not opened and is not running, which must be executed orderly. After the user opens the
ladder which is not running, the system stops refreshing the ladder network information to
avoid the mistake. When the cursor stops in the background edit file the user can press
“Change” to open
【
LADDER
】
to modify the file ground (including ladder version number,
adaptive machine tool, ladder maintenance personnel).
1.2.2 PLCGRA Interface
Press 【 PLCGRA 】 to enter PLCGRA interface or define the bit parameter N0 ： 26#6=1 to press
< INFO > key on the PLC interface to enter PLCGRA interface as Fig.1-2-2-1
：