GSK 980TC3 Series, Руководство пользователя

Страница: 44 / 226

GSK980TC3 Series Bus Turning CNC system PLC, Installation and Connection User Manual
32
一
Programming
TIMER=Setting time
ACT
W
Fig. 5-12-2
Parameter:
TIMER
：
timer serial number is named with xxx which are numbers (0
～
127).
Table 5-12-1 （ timer accuracy ）
Type of
timer
Setting
number
Setting time Error
8ms 0 8ms to 524.280s 0 to the 1
st
level scanning period
48ms 1 48ms to 31.456min 0 to the 1
st
level scanning period
1s 2 1s to 546 min 0 to the 1
st
level scanning period
10s 3 10s to 182 h 0 to the 1
st
level scanning period
1min 4 1min to 65535min 0 to 1s
1ms 5 1ms to65.4s 0 to the 1
st
level scanning period
Preset time
：
The fixed time setting of the fixed timer, range: 0~65535.
Output:
W
：
output coil. W=1 when the output reaches the preset value. W=0 when the output
does not reach the preset value.
Note: The system automatically check the timer’s sequence number range. An alarm occurs when the serial
number is repetitive or exceeds its range. The preset time of the timer is solidified in ROM with the
ladder diagram, modifying the ladder diagram can modify the timer’ time.
5.13 TMRC
（
Timer
）
Function:
This is an on-delay timer.
Format:
Fig. 5-10-1
ACT
TMR
TIMER number
（
W
）