Grundig GV 560 HiFi, Руководство пользователя

Страница: 41 / 43

40
Useful Information
Fixing faults yourself
Not every picture or sound fault means a defect in
your recorder.
For example, a cable that was accidently pulled out,
a defect in the TV set, or a failure of the transmitter
or of your aerial system also leads to reception pro-
blems.
Fault Cause Remedy
No clock on the recorder/ Mains plug disconnected or Insert mains plug or use
Cassette is not pulled in. defective contact. another wall socket.
Recorder cannot be operated, Lock is activated. Deactivate the lock.
mains voltage is o.k. (Display »
LOCKED
«).
Recording of TV programmes Aerial cable not connected. Connect aerial cable.
not possible (only snow on
the picture screen).
Station to be recorded Tune to station.
not tuned in on recorder.
TV transmitter failure or Select the programme on the TV
defective aerial system. to check, or ask a neighbour if he
is currently receiving the station.
Recording not possible. The cassette is protected against Tape over the opening on the back
re-recording. of the cassette.
Timer record programming Timer was programmed incorrectly.
was not carried out.
With VPS/PDC programmed recordings
the VPS/PDC time was entered incorrectly.
After interruption of record stand-by
mode, the
¢
TIMER ON/OFF
button was not pressed
(
flashes).
The quality of the playback The TV set is not correctly tuned Tune the TV set correctly to the
picture is poor. to the transmitting channel of transmitting channel of the
the video recorder. video recorder.
The video heads are dirty. Have the video heads cleaned by
a specialist.
The video heads are worn. Consult your specialty dealer.
Operation with the remote The batteries in the remote Insert new batteries.
control is not possible. control are exhausted.
The remote control is not Point the remote control
pointed at the recorder. at the recorder.
Incorrect function level is Switch the remote control to
set on the remote control. the correct function level.
TIMER