Grundig GV 560 HiFi, Руководство пользователя

Страница: 9 / 43

8
Settings
r
Improving picture quality
If wavy lines are visible on the TV screen, the chan-
nel tuned to is already occupied by a TV station.
In this case, proceed as follows:
Press
C
button.
On the TV set, search for a channel – in the UHF-
band between channels 30 and 40 ± 2 channels –
that is not occupied by a TV station (only snow on
the screen).
Store the channel at the TV set (see operating
instructions for the TV set).
Pull the aerial cable out of the socket –
I I
– on the
recorder.
Ń
!
Make sure there is no cassette in the recorder.
– After a short time the recorder will “transmit” the
test pattern.
Using a screwdriver of appropriate size, turn the
channel selector
q on the back of the recorder (see
illustration) to the left or to the right until the test
pattern appears on the TV screen.
Re-insert the aerial cable into the socket –
I I
– on the
recorder.
Terminate setting by pressing the button
A
. 7
6
L
H
L
H
ń
ń
+ +
–
–
5
4
3
2
1
r
Switching the recorder’s transmitter off
and on
If your recorder receives many TV stations between
the channels 30 and 40 in the UHF band, you may
experience picture interference when using your
recorder. To avoid this, the recorder’s transmitter
may be switched off.
Ń
!
In order for the picture/sound signal of the recorder
to be passed to the TV set, the two units must be
connected with a EURO-AV cable (see page 3).
Switch the recorder´s transmitter off by pressing
the
¢
CODE
button, the numbered buttons
8 5 1 8
and the
G
button in sequence.
– The recorder´s transmitter is switched off.
– Brief display at recorder: »
OFF
«.
Switch the recorder´s transmitter on by pressing
the
¢
CODE
button, the numbered buttons
8 5 1 9
and the
G
button in sequence.
– The recorder´s transmitter is switched on.
– Brief display at recorder: »
O N
«.
2
1