GV470S…
Allgemeiner T
eil / General
GRUNDIG
Servicetechnik
1 - 57
6.3 Record Programming
on the set
Press these buttons on the recorder
You will see this in the display of the
recorder
Explanations
All data is entered into the recorder,
and the remaining playing time is brief-
ly displayed.
appears.
The recorder is in record stand-by
mode, and the drive mechanism but-
tons cannot be operated.
Following this example, you can enter
the recording data for additional broad-
casts.
Start at point 1 of this section.
TIMER
6. Entering the stop time
Hours (0 to 23)
l
%
or
&
¢
OK
.
Minutes (0 to 59)
l
%
or
&
¢
OK
.
The stop time is the end of the broad-
cast, in the example 22:00.
uu
BBC I
20:00
I
22:35
P R O G
SEC PAL
S A T
START
C +
DATE
S T O P
VPS
PDC
BBC I
20:00
I
22:00
P R O G
SEC PAL
S A T
START
C +
DATE
S T O P
VPS
PDC
6.3 Record Programming
Variant 5
After programming ...
... the remaining playing time of the tape is briefly displayed.
The display then shows the programme position with the sta-
tion identification abbreviation as well as the start time and
stop time of the first chronological TIMER position.
Possible messages in the recorder display
If the display of the recorder shows …
…
REST
and
FULL
a cassette with insufficient playing time
was inserted.
If the sum of all recording times is
greater than the total playing time of the
inserted cassette, the recorder will
record up to the end of the tape.
The recorder then automatically
rewinds the cassette all the way to the
beginning and then switches to stop.
…
FULL
all TIMER positions of the recorder are
occupied.
…
REST
and
—:—
the cassette´s playing time was not
recognised, or a daily/weekly recording
is programmed.
…
REST
and
CASS
no cassette is inserted.
…
COLL
the TIMER recording times overlap
each other.
If »
CASS N
0
=== « appears in the display of the recorder
instead of the cassette number, you must enter the number if
you want to archive the cassette.
Enter the cassette number as a three digit number with the
numeric buttons
1
...
0
and confirm with the
‚
but-
ton.
The recorder automatically stores » DIVERSE « as the catego-
ry in the archive, as well as the station identification abbrevia-
tion and the start time as title, when the recording starts.
After the recording is completed, you can enter the title of
your choice and assign it to a category; see chapter “Informa-
tion on Cassette Contents”.
Entering a different date
Follow this procedure for entering a different date instead of
the one provided in point 3.
b) Enter the desired day (1 to 31) with the
l
%
or
&
but-
ton and confirm with the
¢
OK
button.
c) In order to record weekly broadcasts at the same time,
press the
å
button and then enter the day´s date with
the
l
%
or
&
button and confirm by pressing the
¢
OK
button.
The recorder will record the broadcast every week at the
same time until the end of the tape is reached.
d) In order to record daily broadcasts at the same time, press
the
å
button and then enter the day´s date with the
l
%
or
&
button and confirm by pressing the
¢
OK
but-
ton.
The recorder will record the broadcast every day at the
same time until the end of the tape is reached.
The “daily” function cannot be used for recording on
Saturday and Sunday.
Checking the occupied TIMER positions in the
recorder
Press the
z
button to select the respective TIMER. The
display on the recorder shows the desired TIMER position.
Clearing an occupied TIMER position in the
recorder
Press the
z
button to select the respective TIMER.
Press the
ß
button to clear the data in the TIMER position.
Interrupting the record stand-by mode of the
recorder
If you have programmed TIMER positions but wish to use the
recorder while it is in record stand-by mode, or you want to
terminate the TIMER recording, then:
press the
>
button and the cassette is automatically ejec-
ted, or press the
©
(TIMER) button.
The TIME data disappear from the display on the recorder,
the TIMER symbol flashes, and the data are retained.
Now select the desired function.
Reactivating the record stand-by mode of the
recorder
Insert a cassette with sufficient playing time, wait until the
tape measurement is completed, and then press the
¶
ON/OFF
(TIMER) button.
The remaining playing time briefly appears in the recorder´s
display.
The recorder is once again in the record stand-by mode and
the TIMER recordings will be made at the programmed times.
If »
CASS N
0
=== « appears in the display of the recorder
instead of the cassette number, you must enter the number if
you want to archive the cassette.
Enter the cassette number as a three digit number with the
numeric buttons
1
...
0
and confirm with the
‚
button.
The record stand-by mode of the recorder is now
interrupted.
