Allgemeiner T
eil / General
GV470S…
1 - 54
GRUNDIG
Servicetechnik
6.1 Record Programming
Variant 1
Possible messages in the dialogue line
If the “Remaining time” is negative (–) and highlighted in red,
then a cassette of insufficient playing time has been loaded,
or the sum of all TIMER recordings is too large.
If the message » Record period « appears instead of
» Remaining playing time, « then...
... no cassette is loaded;
... the cassette is protected against new recording and will be
automatically ejected.
... the playing time of the cassette was not recognized.
If a red line with the message » Record Timer Overlap «
appears (the corresponding TIMER positions are highlighted
in red), then the recording times of the TIMER positions over-
lap.
In this case, change the data of one TIMER position by
pressing the
“
(green) button and selecting the timer
position with the
W
or
Q
button.
Select the data to be changed with the
E
or
R
button,
enter the new data, and confirm the data lines step by step
with the
O
button.
When you are still in the “Record Programming” mode, the
message “Record beginning soon” will appear ten minutes
before the beginning of the recording.
If the message » Record start time has passed « appears,
then you must immediately exit the record programming
mode so that the recorder can start recording.
In order to do so, press the
©
(TIMER) button.
Modifying individual data items of a TIMER posi-
tion
Select the “Info” menu by pressing the
ø
button.
Select the “Record Programming” menu by pressing the
numeric button
1
, and then press the
“
(green) button.
Select the respective TIMER position by pressing the
W
or
Q
button.
Select the data item to be modified by pressing the
E
or
R
button, enter the new data with the numeric buttons
1
...
0
, and confirm the data lines step by step with the
O
button.
Clearing TIMER positions
Select the “Info” menu by pressing the
ø
button.
Select the “Record Programming” menu by pressing the
numeric button
1
, and then press the
“
(green) button.
Select the TIMER position to be cleared with the
W
or
Q
button and clear it by pressing the
ƒ
button.
The TIMER position is cleared and can be programmed again.
Interrupting the record stand-by mode of the
recorder
If you have programmed TIMER positions but wish to use the
recorder while it is in record stand-by mode, or you want to
terminate the TIMER recording, then:
press the
>
button on the recorder, the cassette is automa-
tically ejected,
or
press the
©
(TIMER) button.
The TIMER data disappears from the display of the recorder
and the TIMER display flashes.
Now select the desired function.
Reactivating the record stand-by mode of the
recorder
Insert a cassette with sufficient playing time, wait until the
tape measurement is completed, and then press the
©
(TIMER) button.
The remaining playing time appears briefly in the display of
the recorder.
The recorder is in ready mode again, and the TIMER accord-
ings are made at the set times.
The cassette number also appears briefly in the display.
If »
CASS N
O
-
--- « appears in the display of the recorder
instead of the cassette number, you must enter the number if
you want to archive the cassette.
Enter the cassette number as a three-place number with the
numeric buttons
1
...
0
and confirm with the
O
button.
The recorder is once again in the record stand-by mode and
the TIMER recordings will be made at the programmed times.
The record stand-by mode of the recorder is now inter-
rupted.
Programming with the ShowView System,
Variant 2
You must perform the settings described in chapter so that
your recorder is able to evaluate the ShowView data.
Programming example
2. Entering the ShowView number for
the desired broadcast
1
...
0
Enter the same ShowView code as the
one given in your TV programme guide.
If you want to record daily programmes
– or weekly programmes – which are
broadcast at the same time, press the
å
button once or twice.
Press the
w
button if you want to
record in the long-play mode.
The “daily” function cannot be used
for recording on Saturday and Sun-
day.
AV/CV
TRACKING
PROGRAM
2
3
1
5
4
8
9
7
0
SAT
6
EW/ED
SET
;
OK
CL
CHECK
AU
TO
p
o
ON/OFF
TIMER
RECORD
TV
AV
8
o
p
+
–
PROGRAM
:
Ç
Hi-Fi
COUNT
0000
LP
*
8
V
S-VHS
e
RP 47
Press these buttons on the
remote control
AV/CV
1
5
4
8
7
0
SAT
EW/ED
SET
;
OK
CL
CHECK
ON/OFF
TIMER
RECORD
You will see this on your TV screen
Explanations
1. Starting programming
¶
%
The remote control is ready for entering
data.
2
3
1
5
4
8
9
7
0
SAT
6
- - - - -
––––
2
3
1
5
4
8
9
7
0
SAT
6
7654 -
––––
Preparation
Insert a cassette with sufficient playing time; note erase pro-
tection.
When »
CASS N
O
-
--- « appears in the recorder´s display, enter
the number of the cassette as a three-place digit with the
numeric buttons
1
...
0
and confirm with the
O
button.
The cassette number must only be entered if you want to use
the archive system.
Check the time and date.
uu
6.2 Record Programming
with ShowView
