Grunbeck GENO-OSMO-X Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 76

background image

Reverse osmosis system

GENO-OSMO-X

Order no. 134 750 927-inter Edited by: phar/mrie G:\BA-750927-inter_134_GENO-OSMO_X.docx

6

3.4 Protection from water

damage

Warning!

In order to properly protect the installation site against

water damage:



a sufficient floor drain system must be available or



a safety device (see chapter C Accessories) must be in-

stalled.



Warning!

In case of a power failure, floor drains with a dis-

charge to a lifting system will be out of operation.

3.5 Indication of

specific dangers

Danger due to electrical energy!



Do not touch electrical parts

with wet hands! Disconnect the system from mains before start-
ing work on electrical parts of the system. Have qualified experts
replace damaged cables immediately.

Danger due to mechanical energy! System parts may be subject
to overpressure. Danger of injury and damage to property due to
escaping water and unexpected movement of system parts.



Check pressure pipes regularly. Depressurise the system before
starting repair or maintenance work on the system.

Hazardous to health due to contaminated drinking water!



The

system may only be installed by a specialist company. The oper-
ation manual must be strictly adhered to! Ensure that there is
sufficient flow. The pertinent guidelines must be followed for
starting-up after extended periods of standstill. Inspections and
maintenance must be performed at the intervals specified!



Note:

By concluding a maintenance contract, you ensure that all

of the required tasks are performed on time. You may perform
the interim inspections yourself.

4 | Shipping and storage

Attention!

The system may be damaged by frost or high tem-

peratures. In order to avoid damage of this kind:

Protect from frost during transportation and storage!
Do not install or store system next to objects which radiate a lot
of heat.

The system may only be transported and stored in its original

packing. Ensure that it is handled with care and placed the right
side up (as indicated on the packing).

5 | Disposal of used parts and materials

Used parts and materials are to be disposed of, or made availa-

ble for recycling purposes, according to the applicable local
guidelines.

If a material is subject to specific regulations, adhere to the in-
structions indicated on the packing.

If in doubt, contact your local waste disposal authority or the
manufacturer for more information.

«
...
6
7
8
9
10
...
»

Содержание GENO-OSMO-X













































































Отзывы:

Нет отзывов

Похожие инструкции для GENO-OSMO-X

Бренд: Badeloft Страницы: 12

RainStation RS-0001

Бренд: EarthMinded Страницы: 16

Бренд: GE Страницы: 28

Бренд: TBH Страницы: 106

Бренд: Enapter Страницы: 30

Бренд: ROSEDALE Страницы: 6

Бренд: UE Systems Страницы: 13

DW03500 pureFlow

Бренд: Siemens Страницы: 202

Бренд: Rena Ware Страницы: 28

Бренд: Morphy Richards Страницы: 6

Бренд: Acuva Страницы: 32

Бренд: Nimbus Water Systems Страницы: 11

Бренд: Lincoln industrial Страницы: 26

Бренд: Viesta Страницы: 12

Бренд: Gardena Страницы: 7

Бренд: EOS Hitech Страницы: 14

Бренд: EOS Страницы: 16

Бренд: BRENNTAG Страницы: 41

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды