Reverse osmosis system
GENO-OSMO RO 125K
Order no.
285 752 940-inter Edited by: phar-mrie G:\BA-752940-INTER_285_RO_125K.DOCX
37
2.2 How to set the
time
Requirement:
Basic time display is currently being displayed
1. Press P key > 2.5 seconds, only the hours are still displayed 00:
2. Press P button to change the hours (value is flashing, now set the
desired value with the ▼ or ▲ button and save with the P button)
or
press▲ button to advance to the minutes :00
3. Press P button to change the minutes (value is flashing, now set
the desired value with buttons ▼ or ▲ and save with the P button)
4. Return to the basic display time by simultaneously pressing buttons
▼ and▲.
2.3 Access to the
programming
levels – change
parameters
1. Simultaneously pressing the buttons P and ▼ (> 1 sec) causes the
code request C 000 to appear.
2. Set the required code with the ▼ or ▲ buttons and confirm with
P button.
3. Within the programming level, select the desired parameter with
the ▼ or ▲ button and open it for editing with the P button (value
starts flashing).
4. Use the ▼ or ▲ button to change the parameter to the required
value.
5. Save the new parameter setting with the P button (value stops
flashing) or reject the change by simultaneously pressing the ▼
and ▲ buttons, and close the parameter again (value stops
flashing, previous setting remains saved).
6. Return to the basic display time by simultaneously pressing buttons
▼ and▲.
7. If no button is pressed within a parameter level for more than
5 minutes, the system automatically returns to the basic display
time. Any opened parameters (flashing value) and closed and
the old set value is maintained.
2.4 Software version
Display
Parameters
P1.00
Software version of the RO-matic control unit