Reverse osmosis system
GENO-OSMO RO 125K
Order no. 285 752 940-inter Edited by: phar-mrie G:\BA-752940-INTER_285_RO_125K.DOCX
28
2 | Preliminary work
1. Unpack all system components.
2. Check for completeness and undamaged condition.
3. Install the reverse osmosis system GENO-OSMO RO 125K at the
intended location.
3 | How to connect the system to the water supply
Connect the feed water to the system (refer to fig. D-4)
Connect permeate line to the system. With GENO-OSMO
RO 125K-TL to the on-site tank
Caution!
If withdrawal/supply points (e.g. on-site tank) of permeate
from the RO-125K are below the connection level of the system,
a pressure maintaining valve must be installed in the permeate line
to protect the permeate tank against siphoning.
Fig. D-3: Withdrawal point below system level
