Instruction manual 1.0.0 rev1 en
GROW
BASE
13
4.
Enter the chosen value by pressing
the rotary switch.
In order to save the changes made, there
are two options:
1.
Press the rotary switch a bit longer*
and then release it in order to jump to the
screen
“Save & Apply”
.
If the rotary
switch is pressed again, the changed
settings will be saved and applied and the
previous screen will be displayed.
*Longer than half a second but shorter
than 4 seconds.
2.
Go to the screen “
Save & return home”
,
and press the rotary switch in order to save
the changes. Afterwards
will be displayed.
The particular functions and menu sections in detail
Info level
In this section different information like current sensor readings, fan speeds and information
regarding the operation condition is displayed.
This screen is the home screen. It shows
the current temperature (Temp) and
relative humidity (RH).
This screen shows the current CO
₂
concentration detected by the CO
₂
sensor
(available as an accessory).
ppm = parts per million
This screen shows the current negative
pressure (vacuum) detected by the
pressure sensor (available as an accessory).
Pa = Pascal).
This screen shows the current temperature
detected by the additional temperature
sensor. This function is designed for
controlling a heating mat. It also can be
used for controlling the temperature of a
water tank (this temperature sensor is
achievable as an accessory).
This screen shows the minimum and
maximum humidity values (RH) that have
occurred since the last reset.
Desired
DF
RH
C
72
A
E
Desired
F
RH
C
72
A
BC
RH
C
60.7
A
i
Temp
C
24.8
A
C
BC
CO2 concentr.
C
i
1589ppm
BC
Neg. Pressure
C
i
7pa
BC
T heating mat
C
i
28.8
A
C
BC
RH MIN
C
58.4
A
i
RH MAX
C
61.8
A
BC
