Instruction manual 1.0.0 rev1 en
GROW
BASE
4
Safety instructions
Please observe the following information besides the safety instructions of this manual. As with
all electrical devices, use this digital environmental controller carefully and cautiously to avoid
hazards due to electric shock.
Electric shock
Warning!
•
Please note that the integrated power sockets of the device are enabled once the device
is connected to an electrical supply.
•
Only operate the device at the voltage indicated on the device.
•
Do not connect defective equipment to the device.
•
Protect yourself from electric shock by avoiding body contact with earthed or grounded
surfaces such as pipes or radiators.
•
Check all device parts including the power cable and extension cables as well as plug
connections for their proper condition prior to each use. Check the proper status of all
parts connected to the device. Do not use the device if it is damaged.
•
Do not pull on the cables to disconnect the plug from the power socket. Hold the device
plug sockets with one hand while removing electrical equipment by pulling the plug.
•
Do not use the device if it has sustained a fall or if water has penetrated the device interior.
•
Do not use the unit during a thunderstorm.
•
In the event of defects or operational faults, switch off the device immediately and
disconnect it from the power socket.
•
Never hold or carry the device by the power or sensor cable.
•
Maintain a distance between all device parts and warm surfaces.
•
Only use the unit in dry and heated rooms.
•
Never reach for a device that has been submerged in water. In such cases, pull the plug
out of the power socket immediately.
•
Do not subject the device to any impact or drop the device.
