Instruction manual 1.0.0 rev1 en
GROW
BASE
30
Log data
The displayed values are log data. Please
inform our customer service about the
displayed values if required.
Port Lights 0-10V / Multi Out 5
To connect lights with an 0-10/ 1-10V input or DC relays/ contactors, use a suitable cable
available as an accessory. The assignment of the RJ45 jack labelled "Lights 0-10V" is shown in
the following figure.
log
C 5 1
i
1350
BC
Yellow: 0
-
10V lights (Pin 4)
White: GND lights (Pin 5)
20mA MAX
Green: A2 Out 5 (Pin 7)
Brown: GND Out 5 (Pin 8)
1A MAX 12
-
24V
Controller
Lights with
0
-
10/1
-
10V input
Relay/ contactor Out 5
