20
W450769A 01/14
2.5 Entering Calibration Data
WARNING!
WHEN THE SYSTEM IS IN CALIBRATION MODE, AUTOMATIC OVERLOAD CONTROLS
ARE DISABLED. THE CRANE OPERATOR IS RESPONSIBLE FOR PROPER LOADING OF
THE CRANE WHILE PERFORMING CALIBRATION OF THE SYSTEM.
To enter calibration data it is necessary to put the system in calibration mode.
To access calibration mode:
1. Hold down the
TEST
and
SET
buttons simultaneously. The audible alarm will sound and you
will be prompted to enter the security code. You will have five (5) seconds to enter the security
key sequence
2. Enter the security code in order (1, 2, 3, 4) as shown below.
3. The system is now in calibration mode and ready to receive calibration data.
4. Use the buttons adjacent to the titles
Menu Up
and
Menu Down
to scroll through the following
menus:
TEST
SET
1
2
3
4
TEST
SET
