GREER Company MicroGuard MG510, Инструкция по установке, калибровке и устранению неисправностей

Страница: 47 / 76

47
W450769A 01/14
3.3.1 Group “A” Fault Codes
Group “A” fault codes represent faults detected for analog sensors.
NOTE: Check and repair “B” and “C” group faults before proceeding with group “A” fault finding sensors.
The following chart details all the available codes in the left column and the actions to take in the right
column.
FAULT
CODE
SWING
SENSOR
BOOM
ANGLE
SENSOR
EXTENSION
SENSOR
Tdx 1
ROD
PRESSURE
Tdx 0
PISTON
PRESSURE
ACTION
000 No Fault Found NONE
001 X
Replace Computer 002 X
003 X X
004 X Follow SECTION 3.8.3
005 X X
Replace Computer 006 X X
007 X X X
008 X Follow SECTIONS 3.8.5-3.8.7
009 X X
Replace Computer 010 X X
011 X X X
012 X X Follow SECTION 3.8.2
013 X X X
Replace Computer 014 X X X
015 X X X X
016 X Follow SECTION 3.10
017 X X
Replace Computer 018 X X
019 X X X
020 X X
Follow SECTIONS 3.8.2, 3.8.3,
3.10
021 X X X
Replace Computer 022 X X X
023 X X X X
024 X X
Follow SECTIONS 3.8.6, 3.8.7,
3.10
025 X X X
Replace Computer 026 X X X
027 X X X X
028 X X X
Follow SECTIONS 3.8.2, 3.8.3,
3.8.6, 3.8.7, 3.10
029 X X X X
Replace Computer 030 X X X X
031 X X X X X