GREAT PLAINS 1510P, Руководство оператора

Страница: 68 / 146

Great Plains | 118-732M | 4/4/19 Table of Contents Index 64
1510P & 1520P Table of Contents Index Maintenance and Lubrication
Marker Maintenance
Refer to Figure 77
The marker arm is attached to marker body with a 3/8-
inch, grade 2, shear bolt. If this shear bolt breaks,
replace it with a grade 2 bolt.
 NOTE: Failure to replace the shear bolt with a grade
2 bolt can cause marker damage.
If grease-seal cap for marker-disk-hub bearings is
damaged or missing, disassemble and clean hub.
Repack with grease and install a new seal or grease
cap.
Storage
Store the Drill where children do not play. If possible,
store the Drill inside for longer life.
1. Unload seed box:
•
Place tarp under drill or a bucket under each
seed meter.
•
Use a large bucket to empty box as much as
possible. Make sure sliding seed tubes are in the
open position. Open seed meter clean out to
empty seed out of sliding seed tube and meter.
2. Thoroughly clean seed and seed-treatment residue
from boxes and seed meters.
3. Remove seed meter wheels. Store flat and out of the
weather.
4. Remove any dirt and debris that can hold moisture
and cause corrosion.
5. Lubricate and adjust all roller chains.
6. Lubricate areas noted under “Lubrication”, page 65.
7. Inspect drill for worn or damaged parts. Make repairs
and service during the off season.
8. Use spray paint to cover scratches, chips and worn
areas on the drill to protect the metal.
9. Cover with a tarp if stored outside.
17621
Figure 77
Marker Shear Bolt