GREAT PLAINS 1510P, Руководство оператора

Страница: 8 / 146

Great Plains | 118-732M | 4/4/19 Table of Contents Index 4
1510P & 1520P Table of Contents Index Important Safety Information
Practice Safe Maintenance
 Understand procedure before doing work. Use proper
tools and equipment. Refer to this manual for additional
information.

Work in a clean, dry area.
 Lower the Drill, put tractor in park, turn off engine, and
remove key before performing maintenance.
 Make sure all moving parts have stopped and all system
pressure is relieved.
 Allow Drill to cool completely.

Disconnect battery ground cable (-) before servicing or
adjusting electrical systems or before welding on drill.

Inspect all parts. Make sure parts are in good condition
and installed properly.

Remove buildup of grease, oil or debris.
 Remove all tools and unused parts from Drill before
operation.
Prepare for Emergencies

Be prepared if a fire starts.
 Keep a first aid kit and fire extinguisher handy.

Keep emergency numbers for doctor, ambulance, hospital
and fire department near phone.
Wear Protective Equipment
 Wear protective clothing and equipment.

Wear clothing and equipment appropriate for the job.
Avoid loose-fitting clothing.

Because prolonged exposure to loud noise can cause
hearing impairment or hearing loss, wear suitable
hearing protection such as earmuffs or earplugs.
 Because operating equipment safely requires your full
attention, avoid wearing radio headphones while
operating machinery.
Handle Chemicals Properly
Agricultural chemicals can be dangerous. Improper use
can seriously injure persons, animals, plants, soil and
property.
 Read and follow chemical manufacturer’s instructions.

Wear protective clothing.
 Handle all chemicals with care.

Avoid inhaling smoke from any type of chemical fire.
 Store or dispose of unused chemicals as specified by
chemical manufacturer.
OFF