Gravely 950001, Руководство по обслуживанию

Страница: 9 / 66

4 - 9
4.2 FILLING THE FUEL TANK
Two “T” shaped fuel tanks are located on the unit,
above the drive wheels on each side. Each tank is fitted
with a filler cap, breather pipe, baffles, and a
connecting balance pipe. The balance pipe ensures
fuel usage is even from each tank.
Store fuel in an approved container. Keep out of reach
of children.
1. The unit should be parked on a level surface with
the lift arms lowered, the engine off, and the key
removed.
2. Clean around the fuel tank cap on each tank before
removing. Refer to Engine Manual for correct type
and grade of fuel. Leave 1 to 2 inches (25mm to
50mm) of air space below the bottom of the filler
neck. Air space in the tank will allow the fuel to
expand. Never fill the fuel tank completely full.
3. Replace the fuel tank cap on each tank securely.
Wipe up any fuel that may have spilled.
4.3 GENERAL LUBRICATION
Main Frame Maintenance
After every 4 weeks of operation, clean the mainframe
with high pressure water or steam.
Carefully inspect the mainframe for cracks or other
damage and repair as required. Check all pivot points
for wear or elongation, pivot pins for wear, and
bushings for security.
Bushings
The bushing protect the mainframe and other major
fabricated components from wear. These bushings,
although unlikely to wear, can be pressed out and
replaced if worn or damaged. The following illustrations
indicate the location of bushings.
WARNING: POTENTIAL HAZARDOUS! Fuel
is extremely flammable and highly explosive.
Personal injury and property damage may
result if not handled properly.
• Fill the fuel tank outdoors in an open area.
Do not fill when the engine is hot. Wipe up
any fuel spills.
• Never fill the fuel tank completely full.
Empty space in tank allows fuel to
expand.
• Never smoke when handling fuel. Stay
away from open flames. Fuel fumes can
be ignited by sparks.
Bushing
Lift Cylinder Lower Pivot Point
Bushings