GRAUPNER mz-24 HOTT, Руководство по эксплуатации

Страница: 99 / 108

Touch
Touch
Touch
99
Telemetry Telemetry
Touch
Touch
Touch
Touch
Touch
12. Butterfly (Glider)
It is used in glider type only. This function allows powerful brake operation by simultaneously
raising the left and right ailerons and lowering the flaps. Butterfly produces an extremely
efficient landing configuration by flying at a slower speed.
CAUTION: We recommend that you do several tests on high altitude to make the best use of
this function.
For the setup of butterfly function, touch “Butterfly” icon to access to the Butterfly setup page.
Touch “INH” icon to switch to “ON” to call the “Select” message popup and move the switch
or stick or volume with your choice then that switch or stick or volume is designated as on/ off
key and then the key direction setup page appears. You may select ON or OFF by touching
icons. When the key is moved to the direction of ON, the function is operated. Touch “BACK”
icon to return to the Butterfly setup page. The setup pages of AILE, FLAP, ELEV and BUT
-
TERFLY OFF appear by touching “NEXT” button. AILE, FLAP values are activated in blue by
touching and adjusted with INC and DEC buttons. ELEV can be set with curve in the graph.
You need to mark the point on graph first and then adjust the operation curve with “DEC”,
“INC”, X-axis and Y-axis buttons. Touch “ST OFF” to change to “ST ON” then the throttle
position line appears on graph. Move throttle stick and place the line at the desired position
between point “L” and “H” then touch “ENT” icon on the bottom right. Now the new point is
marked in graph. You can mark five points between point “L” and “H” in the same way. Touch
ST ON” to change to “ST OFF” and complete the point setup. Now touch “DEC” or “INC” but-
ton to select point and touch X-axis or Y-axis to activate and then touch DEC” or “INC” button
to adjust the operation curve. If you touch OFF icon in Curve line, it is changed to ON and the
operation curve is smoother. Now touch “NEXT” icon to call “BUTTERFLY OFF” setup page.
This function is used to set whether it is switched off. Move and hold the throttle stick to the
desired position for the function off and touch the value then the stick position is decided and
the assigned value is displayed. The butterfly function is operated under the assigned value
and it is not operated over the assigned value. When the setting for butterfly is completed,
touch “S” icon on the top right to access to Servo page. In Servo page, you may check the
setup value of AILE, FLAP, and ELEV.