GRAUPNER mz-24 HOTT, Руководство по эксплуатации

Страница: 27 / 108

Touch
Touch
Touch
Touch
Touch
Touch
Touch
Touch
Touch
Touch
27
13. Out Swap
This function is used to edit the channel connection between transmitter and receiver. (It is
similar to TX OUT SET function in TX ctl, but Out Swap function is operated without trans-
mitting the setup data to a receiver unlike TX OUT SER function. Even if receiver channels
are more than transmitter channels, you are able to set receiver channel in “TX OUT SET”
function, but “Out Swap” function allows you to edit only twelve channels connected to the
transmitter.)
In base menu page, touch “Out.Swap” icon to call “Out. Swap” setup page. The channel order
of transmitter is set as the same as the order of receiver. Touch the channel number to acti-
vate in blue and decide the desired channel number with “INC” and “DEC” button. Every chan-
nel is set in the same way. After setup, touch “BACK” icon to return to the base menu page.
Touch