GRAUPNER mz-24 HOTT, Руководство по эксплуатации

Страница: 23 / 108

Touch
Touch
Touch
Touch
Touch
Touch
Touch
Touch
Touch
Touch
Touch
23
9. FAILSAFE
When you bind your transmitter, you are programming the receiver with failsafe defaults. If
connection is lost between the transmitter and receiver, the receiver immediately operates in
those preprogrammed default positions.
The default value is “Hold” and you may select “Hold” or ”F/S” for up to six channels.
CAUTION: Fail safe function should be operated when the transmitter and receiver are
switched on.
Hold: If you lose connection between the transmitter and the receiver, the preset channels
hold the last given command.
F/S: If the signal is lost, the preset channels are driven to their failsafe preset position.
In the base page, touch “Fail Safe” icon to call “Fail Safe” setup page. All channels’ default
values excepting for throttle channel are set in “Hold”. Touch “Hold” icon in the channel to set
to “F/S” and then touch the “SET” value to activate in blue. After that, move transmitter stick
to the desired position and touch “Set” icon in the right bottom then the position of transmitter
stick is displayed in percentage. Every channel can be set in the same and when touching
NEXT icon in the right, you may call the next setup page.
You may set “Delay” function after all channels setup, 0.25s is set by default, and may select
any of 3 types ( 0.5s, 0.75s, 1.0s ) by touching the delay mode icon. After “Delay” setup, be
sure to touch “STO1” and “STO2” icons in the right to transmit Failsafe setup data to a receiv-
er. Now failsafe setup is completed.